INTERDISCIPLINARY GENERAL ENGINEER/ARCHITECT WITH SECURITY CLEARANCE
Department of the Navy
Goose Creek SC 29445 US
Summary This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the How to Apply section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer. Duties * You will monitor construction activity to ensure compliance with contract plans, specifications, and scheduling. * You will manage complex and challenging construction projects in various geographic locations in support of Navy, Marine Corps, or other agency clients with critical, time-sensitive missions and functions. * You will manage safety review of activity hazard analyses, review and acceptance of accident prevention plans, review and acceptance of critical lift plans, and ensuring contractor compliance with applicable safety requirements. * You will make site investigations to collect pertinent data and respond to request for information. * You will negotiate construction modifications with contractor representatives. * You will represent Facilities Engineering and Acquisition Division (FEAD), (ROICC), (OICC) as the technical representative in matters involving contract modifications and claims. Requirements Conditions of Employment * Must be a US Citizen. * Must be determined suitable for federal employment. * Must participate in the direct deposit pay program. * New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov * Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. * Males born after 12-31-59 must be registered for Selective Service. * You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. * This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes. * You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases. * This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. * You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment. * You will be required to obtain and maintain a current valid United States driver's license. Qualifications In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Overseeing or providing construction engineering support for capital improvement projects including military construction and facilities major renovations; 2) Managing or providing significant assistance to the management of capital improvement projects from conception through close-out, to include scope, schedule and cost; 3) Monitoring construction contractor quality and safety programs via available data and metrics and by conducting site visits; 4) Providing recommendations for resolving project problems due to design errors, unforeseen conditions, or changes in criteria; and 5) Preparing and presenting briefs related to scopes of work, design reviews, contract negotiations, etc. NOTE: This information must be fully supported in your resume. Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ and
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess: For the 0801 Series:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.orgOREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. For the 0808 Series:
Successful completion of a bachelor's or higher degree in architecture.
OR
Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
Successful completion of a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. My curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR I lack a degree in architecture, but I have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that I have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note -
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ and
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess: For the 0801 Series:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.orgOREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. For the 0808 Series:
Successful completion of a bachelor's or higher degree in architecture.
OR
Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
Successful completion of a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. My curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR I lack a degree in architecture, but I have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that I have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note -